161 lines
4.2 KiB
C++
161 lines
4.2 KiB
C++
/**
|
|
*
|
|
* This file is part of Pat80 Utils.
|
|
*
|
|
* Pat80 Utils is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* Pat80 Utils is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY * without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with Pat80 Utils. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*
|
|
* SPI SD-Card test sketch
|
|
* Reads the first 128 bytes from sdcard and prints it out as ascii characters in serial monitor at 9200 baud
|
|
*
|
|
* Implementation of the specification at http://elm-chan.org/docs/mmc/mmc_e.html
|
|
*/
|
|
|
|
#define CS 5 // aka CAT3
|
|
#define MOSI 4 // aka DI or CMD
|
|
#define SCK 3 // aka CAT3
|
|
#define MISO 2 // aka DAT0
|
|
|
|
void setup() {
|
|
pinMode(CS, OUTPUT);
|
|
pinMode(MOSI, OUTPUT);
|
|
pinMode(SCK, OUTPUT);
|
|
pinMode(MISO, INPUT);
|
|
|
|
Serial.begin(9600);
|
|
|
|
/***** Init sequence *******/
|
|
|
|
// Wait 1ms
|
|
delay(1);
|
|
|
|
Serial.println("Init card...");
|
|
|
|
|
|
// >= 75 clocks with CS and DI high
|
|
digitalWrite(CS, HIGH);
|
|
digitalWrite(MOSI, HIGH);
|
|
for (byte i=0; i<80; i++) {
|
|
clk();
|
|
}
|
|
|
|
// CMD0 with CS low (Software reset). Means "Leave native mode and enter SPI mode"
|
|
digitalWrite(CS, LOW);
|
|
byte arg[] = {0x00,0x00,0x00,0x00};
|
|
sendCommand(B01000000, arg); // First two bits are always 01. Command is 0 (000000).
|
|
byte resp = receiveResponse();
|
|
Serial.print(" CMD0 response: ");
|
|
Serial.println(resp, HEX);
|
|
// Now card is in idle mode
|
|
|
|
// Send CMD8 (check voltage) to find if sd version is 2 or previous
|
|
byte arg2[] = {0x00,0x00,0x00,0x00};
|
|
sendCommand(B01001000, arg2); // CMD8
|
|
resp = receiveResponse();
|
|
Serial.print(" CMD8 response: ");
|
|
Serial.println(resp, HEX);
|
|
|
|
if (resp == 5) {
|
|
// CMD8 Illegal command: sd version 1.X
|
|
|
|
while(true) {
|
|
// Now send ACMD41. ACMD is a CMD55 followed by a CMDxx
|
|
byte arg3[] = {0x00,0x00,0x00,0x00};
|
|
sendCommand(B01110111, arg3); // CMD55
|
|
//resp = receiveResponse();
|
|
Serial.print(" CMD55 response: ");
|
|
Serial.println(resp, HEX);
|
|
byte arg4[] = {0x40,0x00,0x00,0x00};
|
|
sendCommand(B01101001, arg4); // CMD41
|
|
resp = receiveResponse();
|
|
Serial.print(" CMD41 response: ");
|
|
Serial.println(resp, HEX);
|
|
}
|
|
} else {
|
|
Serial.print("Sd version 2 not supported.");
|
|
}
|
|
|
|
|
|
digitalWrite(CS, HIGH);
|
|
|
|
}
|
|
|
|
void loop() {}
|
|
|
|
/**
|
|
* Sends a clock cycle
|
|
*/
|
|
void clk() {
|
|
digitalWrite(SCK, HIGH);
|
|
//delayMicroseconds(1);
|
|
digitalWrite(SCK, LOW);
|
|
//delayMicroseconds(1);
|
|
}
|
|
|
|
/**
|
|
* Sends a command to card.
|
|
* The sent CRC field is valid for the CMD0 message.
|
|
* This is ok, since the CRC field will not be checked in SPI mode.
|
|
* @param index: the command index byte. First two bytes are the sync bytes "01".
|
|
*/
|
|
void sendCommand(byte index, byte arg[]) {
|
|
// Send command index (2+6=8 bits)
|
|
sendByte(index);
|
|
// Send argument (32 bit)
|
|
for(byte i=0; i<4; i++) {
|
|
sendByte(arg[i]);
|
|
}
|
|
// Send CRC with final stop bit (7+1=8 bits)
|
|
sendByte(B10010101); // We send always the CMD0 CRC, because is not checked in SPI mode
|
|
}
|
|
|
|
/**
|
|
* Sends a byte to the card. The two MSB must be 01 as per specification.
|
|
* Byte is sent MSB first.
|
|
*/
|
|
void sendByte(byte b) {
|
|
for (byte i=0; i<8; i++) {
|
|
// If last bit is 1 set MOSI HIGH, else LOW
|
|
digitalWrite(MOSI, (b & B10000000) == B10000000 ? HIGH : LOW);
|
|
//Serial.print((b & B10000000) == B10000000 ? "1" : "0");
|
|
clk();
|
|
// Shift byte to have, in the next cycle, the next bit in last position
|
|
b = b << 1;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Receives the response from card
|
|
* MSB first.
|
|
*/
|
|
byte receiveResponse() {
|
|
digitalWrite(CS, LOW);
|
|
digitalWrite(MOSI, HIGH);
|
|
|
|
// continuously toggle the SD CLK signal and observe the MISO line for data:
|
|
// message response starts with 0
|
|
while (digitalRead(MISO)) {
|
|
clk();
|
|
} // Wait for first 0
|
|
|
|
byte resp = 0;
|
|
// Read 8 bits
|
|
for (byte i=0; i<8; i++) {
|
|
resp = resp << 1;
|
|
resp = resp | digitalRead(MISO);
|
|
clk();
|
|
}
|
|
return resp;
|
|
}
|