41 lines
1.6 KiB
NASM
41 lines
1.6 KiB
NASM
; *******************************************
|
|
; * PAT80 COMPOSITE PAL VIDEO ADAPTER *
|
|
; * Communication module *
|
|
; *******************************************
|
|
|
|
; This module manages the communication between Pat80 and
|
|
; the video adapter.
|
|
|
|
; INTERNAL POINTER:
|
|
; Internally, the last screen position is represented by 24 bits in two registers:
|
|
; POS_COARSE: Register Y (16-bit, r31 and r30): Coarse position. Points to one of the chunks
|
|
; (character columns). 52 chunks per row, 304 rows. Used for character position, as
|
|
; 1 chunk = 1 byte = 1 character.
|
|
; POS_FINE: Register r24: Fine position. Represents the bit inside the chunk selected by POS_COARSE.
|
|
; Ignored in character mode (the character is always aligned to column). Used in graphic mode.
|
|
|
|
; Initializes and waits for a byte on PORTB
|
|
comm_init:
|
|
call cursor_pos_home ; Set cursor to 0,0
|
|
comm_wait_byte:
|
|
in A, DATA_PORT_IN ; read PORTB
|
|
; Check continuously CLK until a LOW is found
|
|
sbic PORTD, CLK_PIN
|
|
jmp comm_wait_byte
|
|
; CLK triggered: Copy PORTB to the next framebuffer byte
|
|
st Y+, A
|
|
; if reached the last framebuffer byte, exit cycle
|
|
cpi r31, 0b00111110
|
|
brne comm_wait_byte ; if not 0, repeat h_picture_loop
|
|
cpi r30, 0b11000000
|
|
brne comm_wait_byte ; if not 0, repeat h_picture_loop
|
|
jmp comm_init ; filled all memory: reset framebuffer position
|
|
|
|
; Sets the cursor to 0,0 and clears fine position
|
|
cursor_pos_home:
|
|
; Set Y to framebuffer start
|
|
ldi YH, high(FRAMEBUFFER<<1)
|
|
ldi YL, low(FRAMEBUFFER<<1)
|
|
clr POS_FINE
|
|
ret
|