62 lines
2.1 KiB
C++
62 lines
2.1 KiB
C++
/**
|
|
* Terminal interface.
|
|
* This sketch allow an Arduino to be used as a terminal to log into Pat80.
|
|
* The Arduino is connected to the Pat80 I/O bus and to the terminal computer via USB.
|
|
* The Arduino IDE serial monitor is used to send and receive commands to the Z80.
|
|
*/
|
|
|
|
// EN 2 // Input, Active low
|
|
// WR 11 // Input, Active low
|
|
// DATA BUS (Input/Output, active high): 3, 4, 5, 6, 7, 8, 9, 10;
|
|
|
|
byte incomingBuffer = 0; // Incoming from computer, to the Pat80
|
|
byte outgoingBuffer = 0; // Outgoing to computer, from the Pat80
|
|
|
|
void setup() {
|
|
DDRD = B00000010; // Port D (used arduino pins 2 (EN) and 3 to 7 (DATA)) is input. Avoid changing serial pins.
|
|
DDRB = B00000000; // Port B (used arduino pins 8 to 10 (DATA) and 11 (WR)) is input
|
|
|
|
Serial.begin(2000000);
|
|
Serial.println("Pat80 terminal");
|
|
|
|
attachInterrupt(digitalPinToInterrupt(2), onClk, CHANGE);
|
|
}
|
|
|
|
void loop() {
|
|
if (Serial.available() > 0) {
|
|
incomingBuffer = Serial.read();
|
|
}
|
|
if (outgoingBuffer != 0) {
|
|
if ((outgoingBuffer >= 8 && outgoingBuffer <= 13) || (outgoingBuffer >= 32 && outgoingBuffer <= 127)) {
|
|
// Printable character
|
|
Serial.print((char)outgoingBuffer);
|
|
} else {
|
|
// Non-printable character
|
|
Serial.print("[0x");
|
|
Serial.print(outgoingBuffer, HEX);
|
|
Serial.print("]");
|
|
}
|
|
outgoingBuffer = 0;
|
|
}
|
|
}
|
|
|
|
void onClk() {
|
|
// In any case, return to high impedance state
|
|
DDRD = B00000010;
|
|
DDRB = B00000000;
|
|
if ((PIND & B00000100) == 0) {
|
|
// EN is LOW: Clock pulse started
|
|
if ((PINB & B00001000) == B00001000) { // WR is HIGH (Pat80 wants to Read (we send data))
|
|
DDRD = DDRD | B11111000; // Port D (arduino pins 3 to 7) is output. In or to preserve serial pins and interrupt pin
|
|
DDRB = B00000111; // Port B (0,1,2) = pins 8,9,10 output
|
|
// Split byte to two parts
|
|
PORTD = incomingBuffer << 3;
|
|
PORTB = incomingBuffer >> 5;
|
|
incomingBuffer = 0;
|
|
} else {
|
|
// Pat80 wants to Write (we receive data)
|
|
outgoingBuffer = (PIND >> 3) | (PINB << 5); // Compose the final byte from the two parts
|
|
}
|
|
}
|
|
}
|